The OP-FT-PM3 is a basic Optical Power Meter designed for use in performing insertion loss measurements in single-mode and multimode optical networks. A general-purpose
meter with an input range of +6 dBM to -50 dBm and is calibrated at 850, 1300, 1310, 1490, 1550 and 1625 nm. Models can detect CW and 270, 330, 1000 or 2000 Hz tones.
FC, SC and ST connector adaptors are included and the unit is supplied with 2 x AA batteries and a Quick Reference Guide.
Optical Power Meters are designed for ease of use.
Each is equipped with a large, easy-to-read LCD, which shows the input power level, the remaining battery capacity, and the
Back light enables the OP-FT-PM3 to be used in dimly-lit spaces.
The Optical Power Meters will operate for approximately
300 hours from a pair of ordinary AA alkaline batteries. An automatic power-down circuit optimizes battery life by shutting off after 5 minutes operation.